Can't remove bgp aggregate-address statements

[pintomark]

I have a 6509 running s72033_rp-ADVIPSERVICESK9_WAN-M version 12.2(33)SXH5.  Four incorrect bgp aggregate-address statements were entered in which overlap.  Attempted to remove the statements but they won't come out.

aggregate address 16.37.31.0 255.255.224.0 summary-only

aggregate address 16.37.30.0 255.255.224.0 summary-only

aggregate address 16.37.29.0 255.255.224.0 summary-only

aggregate address 16.37.26.0 255.255.224.0 summary only

I have entered in the correct statements and have no problem getting those in, removing them, and reentering them.

Any ideas?

Mark Pinto

[Reza Sharifi]

It doesn't appear that SXH supports this command, but SXI does.

have a look at the command reference guide for all the IOS releases that support it.

http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_01.html#wp2436737

HTH

[pintomark]

Thanks for the input,but that's not the problem.  Been using this OS for two years and have never seen this.