cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
354
Views
0
Helpful
1
Replies
Anwar Safian
Beginner

Cat 3850 intervlan license

Hi expert

 

I would like to know what license type for Cat 3850(Lan lite, Lan base, ip base, ip service) for enable intervlan routing?

1 ACCEPTED SOLUTION

Accepted Solutions
luis_cordova
VIP Advisor

Hola @Anwar Safian ,

 

According to this link, with the LanBase license you can execute routing commands, such as static routes, so that with that license you should being able to do InterVlan:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

 

High-performance IP routing

 

The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3850 Series Switches:

●   IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], and RIPv2, RIPng, Enhanced Interior Gateway Routing Protocol [EIGRP] stub) are supported for small-network routing applications with the IP Base feature set. Limited static routing with the LAN Base feature set. Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

 

I leave this picture with the functions of the licenses:

B2B64282-3F48-460F-884C-3FBA1877F0A8.jpeg

 

Regards

 

 

View solution in original post

1 REPLY 1
luis_cordova
VIP Advisor

Hola @Anwar Safian ,

 

According to this link, with the LanBase license you can execute routing commands, such as static routes, so that with that license you should being able to do InterVlan:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

 

High-performance IP routing

 

The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3850 Series Switches:

●   IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], and RIPv2, RIPng, Enhanced Interior Gateway Routing Protocol [EIGRP] stub) are supported for small-network routing applications with the IP Base feature set. Limited static routing with the LAN Base feature set. Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

 

I leave this picture with the functions of the licenses:

B2B64282-3F48-460F-884C-3FBA1877F0A8.jpeg

 

Regards

 

 

View solution in original post