Hi,
I tried several times to upgrade a specific 3560-X Switch (with active ipservices License) from 15.2(3)E2 to 15.2(3)E3. The transfer always fails with updating the Service Module _>
archive download-sw scp://archive:xyz@192.168.123.123/c3560e-universalk9-tar.152-3.E3.tar scp://cisco-archive:Fuu128kk38s@192.168.99.1/c3kx-sm10g-tar.152-3.E3.tar
...
examining image...
extracting info (99 bytes)
extracting c3kx-sm10g-mz.152-3.E3/info (500 bytes)
extracting info (99 bytes)
System Type: 0x00010002
Ios Image File Size: 0x017BB200
Total Image File Size: 0x017BB200
Minimum Dram required: 0x08000000
Image Suffix: sm10g-152-3.E3
Image Directory: c3kx-sm10g-mz.152-3.E3
Image Name: c3kx-sm10g-mz.152-3.E3.bin
Image Feature: IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version: 03.07.02.WAL
Old image for switch 1: flash:/c3560e-universalk9-mz.152-3.E2
Old image will be deleted before download.
Updating FRU Module on switch 1...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!
Updating FRU FPGA image...
FPGA image update failed.
Error 10: Unable to transfer image to FRU Module on switch 1
Error: Failed to update FRU Module image
What can go wrong, what is error 10 ?
br Fritz
