Catalyst 3560

[elautomation]

I am trying to use the remote PS for the Catalyst 3560.  I have not been able to locate the harness to make this connection.  Is the harness normally provided with the switch or purchased seperate.  I need to purchase if not provided.  Could you send me a link to purchase harness.  The manual says it is 120VAC and 12VDC capable.

[Amit Singh · Accepted solution]

Hi Steve,

Are you referring to Cisco Redundant Power supply for 3560, to provide redundant power to the switch? If yes, you need CAB-RPS2300= to connect the 3560 switch to it. Please see the datasheet below :

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps7130/product_data_sheet0900aecd805bbef6.html

HTH,

-amit singh