12-03-2015 10:32 PM - edited 03-08-2019 02:57 AM
interface fastEthernet 1/0/10
priority-queue out
speed 10
duplex full
srr-queue bandwidth limit 15
What is the speed that port 10 is getting with that bandwidth limit?
Solved! Go to Solution.
12-04-2015 01:52 AM
Hi,
The command "srr-queue bandwidth limit 15"
This limits your interface output (egress) to 15% of the total port bandwidth.
So in you case it will be 15% of 10Mbps = 1.5Mbps
Regards
Alex
12-04-2015 01:52 AM
Hi,
The command "srr-queue bandwidth limit 15"
This limits your interface output (egress) to 15% of the total port bandwidth.
So in you case it will be 15% of 10Mbps = 1.5Mbps
Regards
Alex
12-04-2015 05:07 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Just to add to Alex's post, srr-queue bandwidth limit isn't exact. I.e. it's configured for 1.5 Mbps but it might be more or less.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide