04-10-2013 03:22 AM - edited 03-07-2019 12:43 PM
Dear All,
Is it possible to mix 1 and 10 Gigabit links on a 1/10Giga Network Module of the Cat3750X???
I mean porte GE1/1/1 and GE1/1/2 used with SFP and port TE1/1/2 used with SFP+; that makes TE1/1/1 not available as GE1/1/3 and 1/1/4
Thanks for a reply
04-10-2013 08:01 AM
Hi,
You need this module to be able to mix 10Gig and 1Gig on the same module:
C3KX-NM-10G
This module allows you to use 1 10Gig port and 2 1Gig ports.
Have a look at table-4 in the data sheet:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html
HTH
04-10-2013 09:03 AM
Hi Reza,
thanks for the info...Yes I've this module
Thanks
04-10-2013 10:48 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
BTW, I believe I recall there's some special consideration when using the 10g spf+ ports for just gig.
06-02-2013 04:08 PM
Hi Team
wanna clarify, I used module C3KX-NM-10G= and SFP-10G-SR 4 unit, is't possible to use the sfp module 4 unit in the one module C3KX-NM-10G
Thanks
06-02-2013 04:40 PM
Hi,
For the 10Gig module, you can have one 10Gig and 2 1Gig
See table-4 in this link for the combination you can use
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html
HTH
06-02-2013 07:30 PM
Hi Reza
Thank you, so if I used 2 module SFP-10G-SR it's possible right ?
Thanks
06-03-2013 09:32 AM
Hi,
Yes, if your modules is a 10Gig module, you can use 2 10Gig SFP+.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide