07-08-2009 05:38 AM - edited 03-06-2019 06:38 AM
Hi,
I need to design a solution with a catalyst 4507R-E chassi with redundant supervisors (WS-X45-SUP6L-E), and i need 6 SFP's to interconect to 5 remote floors. It's possible use both supervisors slots, or i can't use the redundant supervisors slots ? With this option it's possible to use the two 10GE slots from both supervisors with SFP adaptors and put the 6 SFP's on it ?
Thanks !!!
Solved! Go to Solution.
07-08-2009 06:07 AM
Hello Carlos,
yes it is possible to use the SFP ports on the standby supervisor
see
switch>sh cdp n | exclude SEP
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
router1
Ten 3/1 127 R S I WS-C6509- Ten 4/2
router2
Ten 4/1 130 R S I WS-C6509- Ten 4/2
switch>sh module
Chassis Type : WS-C4507R-E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAE0621003W
3 6 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE1237ULNB
4 6 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE1237ULNZ
5 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1221IZPR
6 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1238UXKZ
This is an handy feature and works well on previous supervisor models I would expect to work also on the sup 6 L -E
Hope to help
Giuseppe
07-08-2009 06:07 AM
Hello Carlos,
yes it is possible to use the SFP ports on the standby supervisor
see
switch>sh cdp n | exclude SEP
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
router1
Ten 3/1 127 R S I WS-C6509- Ten 4/2
router2
Ten 4/1 130 R S I WS-C6509- Ten 4/2
switch>sh module
Chassis Type : WS-C4507R-E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAE0621003W
3 6 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE1237ULNB
4 6 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE1237ULNZ
5 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1221IZPR
6 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1238UXKZ
This is an handy feature and works well on previous supervisor models I would expect to work also on the sup 6 L -E
Hope to help
Giuseppe
07-10-2009 01:18 AM
in all ports ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide