Hello.
We are planning the supervisor upgrade on our 6509-E.
We'd like to install new 2t supervisors.
Now, 6509-e is running in hybrid mode.
We have to update the system bootstrap version? Now is 7.1(1)
Or this is mounted into supervisor?
Thanks a lot.
Daniele
Show version is as follow:
WS-C6509-E Software, Version NmpSW: 8.6(4)
Copyright (c) 1995-2007 by Cisco Systems
NMP S/W compiled on Dec 12 2007, 23:05:14
System Bootstrap Version: 7.1(1)
System Boot Image File is 'bootflash:cat6000-sup2k9.8-6-4.bin'
System Configuration register is 0x2
Hardware Version: 1.1 Model: WS-C6509-E Serial #: xxxxxxxxx
PS1 Module: WS-CAC-3000W Serial #: SNI0913AL64
PS2 Module: WS-CAC-3000W Serial #: AZS13410KWC
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP2-2GE SAL08517Q91 Hw : 5.1
Fw : 7.1(1)
Fw1: 6.1(3)
Sw : 8.6(4)
Sw1: 8.6(4)
WS-F6K-PFC2 SAL0852854Z Hw : 3.5
Sw :
2 2 WS-X6K-SUP2-2GE SAL0711ACLC Hw : 4.2
Fw : 7.1(1)
Fw1: 6.1(3)
Sw : 8.6(4)
Sw1: 8.6(4)
WS-F6K-PFC2 SAL06375YDQ Hw : 3.3
Sw :
3 48 WS-X6148A-GE-45AF SAD09260607 Hw : 1.1
Fw : 8.4(1)
Sw : 8.6(4)
4 48 WS-X6148A-GE-45AF SAL11434VMT Hw : 2.3
Fw : 8.4(1)
Sw : 8.6(4)
5 48 WS-X6148A-GE-45AF SAL1245993P Hw : 2.4
Fw : 8.4(1)
Sw : 8.6(4)
9 16 WS-X6516A-GBIC SAL1049A2QP Hw : 4.5
Fw : 7.2(1)
Sw : 8.6(4)
15 1 WS-F6K-MSFC2 SAL090205QF Hw : 2.8
Fw : 12.1(27b)E4
Sw : 12.1(27b)E4
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 262144K 97342K 164802K 31232K 30959K 273K 512K 145K 367K
2 131072K
Uptime is 1386 days, 10 hours, 4 minutes
