10-11-2014 06:33 PM - edited 03-07-2019 09:04 PM
Hi everybody
Hi everybody .
Please consider the following example:
3560 sw f1/1--------trunk---SW2
3560 sw
f1/1
mls qos trust dscp
3560 is using default cos-dscp map, assume a 3560 receives a frame carrying IP packet on f1/1 with COS 4, what will 3560 switch do?
1) will it use its default cos --dscp map ( cos 4--.dscp 32) and rewrite 32 in dscp field of the packet in the frame and provide PHB for dscp 32 ?
Much appreciated!!
Have a great weekend.
Solved! Go to Solution.
10-13-2014 02:00 AM
Hi
No it will not trust the cos value, because You have configured to trust dcsp. So, the switch will trust the dcsp value in the incoming frame.
/Mikael
10-13-2014 02:00 AM
Hi
No it will not trust the cos value, because You have configured to trust dcsp. So, the switch will trust the dcsp value in the incoming frame.
/Mikael
10-15-2014 08:51 PM
thanks Mikael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide