Cisco 3850 Cluster - Not Showing Health Monitor

[bruce]

Hi,

I recently setup a Cisco 3850 cluster and when I try to monitor the health using Cisco Network Assistant, none of the graphs besides Temperature is populating. Is there some configuration that I'm missing that I need to apply to show this information?

I've attached a screen shot of the issue.

Thanks!

Bruce

[echo3whiskey]

Others with more experience may correct me here, but it may have something to do with which software version you are running.  If you are running 3.x.x, it seems there is a lot of information that isn't readily available from CNA or the web GUI.  If you are running Denali 16.x.x the web GUI shows a ton of information, but I had limited success even getting CNA to recognize that there was a such thing as a C3850 in existence.  Most of the blanks you have - the information is available if you enter CLI commands, just not a nice windows presentation of the data.

[bruce]

Thats sad to hear. I'm running 03.06.06.E. So there isn't any settings that I forgot to turn on for monitoring then from CLI commands?

[echo3whiskey]

None that I know of.  I still hold out hope that someone a little more experience will come along with a great answer.