Cisco 4500X switch upgradation issue

[roshankadam7077]

I have upgraded cisco 4500X switches with cat4500e-universal.SPA.03.11.11.E.152-7.E11.bin IOS and now i am unable to take SSH session as we checked found that this IOS is not supporting SSH then what are the options i have with upgrading with K9 ISO.

[Leo Laohoo]

Upload cat4500e-universalk9.SPA.03.11.11.E.152-7.E11.bin to the switch because the "k9" will support SSH.

[roshankadam7077]

is there any other option available?

[nextcomm]

Could you please share the logs because I just upgraded the switch with this code and SSH is supported? I suggest to check with the line vty configs as I completed the code upgrade I found out the command "transport input none" was set on all VTY lines and I hardcoded it to "transport input ssh". Et Voila!!!

[Joshqun Ismayilov]

@roshankadam7077 

Your image is not supported K9 / cat4500e-universal.SPA.03.11.11.E.152-7.E11.bin
Pleas use / cat4500e-universalk9.SPA.03.11.11.E.152-7.E11.bin

Thanks!