Hi, Good Day to all.
I need help from you in the configuration below.
When I connect the two wan links and interfaces Fe0 FE1, I browse, however software like skype keep falling and rising all the time.
I wonder where is the error in the configuration that is causing this?
System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
boot-start-marker
boot-end-marker
!
enable secret 5
!
aaa new-model
!
!
aaa authentication login SSH_aaa local
aaa authentication login CON_aaa local
aaa authorization console
aaa authorization exec SSH_aaa local
aaa authorization exec CON_aaa local
!
!
!
!
!
aaa session-id common
!
!
!
memory-size iomem 10
!
!
ip source-route
!
!
!
!
ip cef
no ipv6 cef
!
!
multilink bundle-name authenticated
license udi pid CISCO881-SEC-K9 sn FTX15288310
!
!
username xxxxx privilege 15
!
!
!
track 1 ip sla 1 reachability
delay down 9 up 10
!
track 2 ip sla 2 reachability
delay down 9 up 10
!
!
!
!
!
!
!
interface FastEthernet0
description Conexao BT
switchport access vlan 10
!
hold-queue 100 out
!
interface FastEthernet1
description Conexao Vodanet
switchport access vlan 20
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface FastEthernet4
no ip address
shutdown
duplex auto
speed auto
!
!
interface Vlan1
description LAN
ip address 10.8.x.x 255.255.255.0
ip nat inside
ip virtual-reassembly
!
hold-queue 100 out
!
interface Vlan10
description WAN 2
ip address 10.0.x.x 255.255.255.0
ip load-sharing per-packet
ip nat outside
ip virtual-reassembly
!
hold-queue 100 out
!
interface Vlan20
description WAN 2
ip address 10.41.x.x 255.255.255.248
ip nat outside
ip virtual-reassembly
!
hold-queue 100 out
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat inside source route-map RM-1 interface Vlan10 overload
ip nat inside source route-map RM-2 interface Vlan20 overload
ip route 0.0.0.0 0.0.0.0 10.0.x.x
ip route 0.0.0.0 0.0.0.0 10.41.x.x
!
ip access-list extended NATacl
permit ip 10.8.x.0 0.0.0.255 any
!
ip sla 1
icmp-echo 10.23.x.x source-interface Vlan10
frequency 3000
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo 10.23.x.x source-interface Vlan20
frequency 3000
ip sla schedule 2 life forever start-time now
!
!
!
!
route-map RM-2 permit 10
match ip address NATacl
match interface Vlan20
!
route-map RM-1 permit 10
match ip address NATacl
match interface Vlan10
!
!
control-plane
!
!
!
line con 0
authorization exec CON_aaa
logging synchronous
login authentication CON_aaa
no modem enable
line aux 0
line vty 0 4
exec-timeout 15 0
privilege level 15
password cisco
authorization exec SSH_aaa
logging synchronous
login authentication SSH_aaa
transport input telnet ssh
!
scheduler max-task-time 5000
end
