06-13-2012 10:37 AM - edited 03-07-2019 07:14 AM
Hai Friends
I have a cisco 2950 switch, I need to upgrade the ios image.
I can't understand, which is higher verson,
Please help me which is the highist on below.
exitsit image _ c2950-i6q4l2-mz.121-22.EA1b.bin
downloaded image_ c2950-i6q4l2-mz.121-22.EA14.bin
Thanks,
Srinivas. N.
06-13-2012 10:55 AM
Hi!
c2950-i6q4l2-mz.121-22.EA14.bin is newer release.
121-22.EA1b is from 2004:
121-22.EA14 is from 2010:
Kind Regards,
Ivan
**Please grade this post if you find it useful.
06-13-2012 03:49 PM
EA14 is the LATEST and the final IOS for the 2950.
06-15-2012 10:33 PM
Please help me when it is release
I don't understand your question. You want to know WHEN was your switch manufactered or when the IOS you are currently using was released?
whate is the latest verson for above same switch.
Same answer as before: EA14.
06-15-2012 11:06 PM
Hi Friends,
Thanks for shareing your knowledge..
I have another cisco 2950 switch (c2950-i6q4l2-mz.121-22.EA1b)
Please help me when released the IOS (c2950-i6q4l2-mz.121-22.EA1b)
and what is lateset ios verson for cisco 2950 (c2950-i6q412-mz-121.........)
My switch model no WS-C2950G-24-EI
Thanks,
Srinivas. N
06-15-2012 11:10 PM
I've posted my response to your query.
06-15-2012 11:15 PM
Hi leolaohoo,
I could understand,
and please let me know how series order will come.
06-15-2012 11:36 PM
EA1b is the OLDEST of the IOS while EA14 is was last released back in 2010.
What are you trying to do exactly?
06-18-2012 01:26 PM
Hi friends,
I have 3750 switch
existing image is c3750-ipbase-mz.122-35.SE5
found new image c3750-ipbasek9-mz.122-55.SE5
can i update the new image:.
Note:- After ipbase k9 is added
06-19-2012 01:24 AM
Hi,
Yes, you can. Cisco IOS Release 12.2(55)SE runs on all Catalyst 3750, 3560, 2975, 2960-S, and 2960 switches and on Cisco EtherSwitch service modules.
Here are some suggestions on the upgrade procedure:
Kind Regards,
Ivan
**Please grade this post if you find it useful.
06-21-2012 11:49 PM
Hi Friends,
I have different models of cisco switches and router..
for example i have
Cisco 2960 24ports poe switch, (model no WS-C2960-24PC-L)
and
Cisco 2960 48ports non poe switch (model no WS-C2960-48TT-L)
for these 2 devices i need to update the ios, so how i can sellect the image?
on based on model no or based on verson like c2960-lanbasek9-mz.xxxxxxxxxx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: