Cisco model types

[pdub206]

I'm trying to figure out which switch model I have.  The packing list that I received indicates it is part number C1-WS3650-48PD/K9, item description Cisco ONE Catalyst 3650 48 port poe 2x10g uplink.

Searching under all Products on Cisco's website shows a 

3650-PD-E

3650-PD-L

3650-PD-S

Which version do I have, and what do the -E -L and -S options mean?

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Usually that suffix indicates factory licensing.

-L = LanBase - L2 or simple L3

-S = Standard (IPBase) - basic L3

-E = Ehanced (IPServices) - advanced L3

[Carlos Villagran · Accepted solution]

Hi!

It is based on license:

E - IP Services

S - IP Base

L - LAN Base

The version you have depends in the license of the switch.

Hope it helps, best regards!

JC