Cisco Packet Tracer assignment. Help, please

Twina1111 · ‎03-31-2015

Please See attached pkt

I did not understand the topology

I do not understand how should ‘TEST PCs’ communicate w/ any VLAN

Guidelines to follow

-Each PC should be on the VLAN specified

-The access point should be on VLAN 40, and secured using WPA2

-Router0 should be the gateway for VLANs 10 and 30

-Router1 should be the gateway for VLANs 20 and 40

-OSPF should be implemented on all routers

-IP addresses to start w/:

*VLANs subnetted from the 192.168.0.0 /16 range

*Serial links subnetted from 10.0.0.0 /8 range

*Test PC networks from the 172.16.0.0 /16 range

I will really appreciate

Good life to u all! :)

Jon Marshall · ‎04-02-2015

Most of us don't use PT so you need to post the topology as a diagram.

However if you are asking us to do the assignment for you then I doubt anyone will do that.

If you have tried to set it up and can't get it working then we may be able to help.

Jon