12-10-2022 05:25 PM
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 192.168.1.6 YES manual up up
GigabitEthernet0/1 192.168.1.14 YES manual up up
Vlan1 unassigned YES unset up down
Router(config-if)#ip add 192.168.1.13 255.255.255.248
% 192.168.1.8 overlaps with GigabitEthernet0/1
How do I configure it without overlapping?
Solved! Go to Solution.
12-11-2022 12:54 AM
Hello,
the next subnet would be 192.168.1.16/29. So assign:
ip address 192.168.1.17 255.255.255.248
in order to avoid the overlap.
12-11-2022 12:54 AM
Hello,
the next subnet would be 192.168.1.16/29. So assign:
ip address 192.168.1.17 255.255.255.248
in order to avoid the overlap.
12-12-2022 12:00 PM
Thank you, I should have figured.
12-11-2022 01:09 AM
Hello,
You can use IP Calc: https://jodies.de/ipcalc?host=192.168.1.14&mask1=29&mask2=
Next subnet with /29 mask: https://jodies.de/ipcalc?host=192.168.1.22&mask1=29&mask2=
12-12-2022 12:01 PM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide