Cisco Smart Switch Business 250 Series - cannot enable DHCP Server

[cbsuser]

I have a CBS250-16P-2G switch, running software version 3.1.1.7

According to the CLI documentation, I can enable DHCP server on the switch:

https://www.cisco.com/c/en/us/td/docs/switches/lan/csbms/CBS_250_350/CLI/cbs-250-cli/dhcp-server-commands.html

However this does not work, from CLI or WebInterface I do not see the option to start and configure the DHCP server.

[Mark Elsen]

 -   That document seems to describe 'common' cli commands available on these devices , yet looking at the datasheets it seems that dhcp-server  is available  for the 350-series ,but not  the 250-series 

 M.

[Georg Pauwen]

@Mark Elsen is right, the CBS250 can be a DHCP client only, and can do DHCP relay at most.