Why do the CMICR-4PS 15.2(8)E2 switches not show lldp in the config. This causes me issues because I have policies that look for the "lldp run" line to be implemented. It seems this line should also show up in the CMICR-4PS.
xxxxxxx#sh run | inc lldp
alias exec sln sh lldp neighbors
alias exec slne sh lldp neighbors | e (....)\.(....)\.(....)
usmobwetl-sw-01#
it is however interesting that LLDP is actually working.
xxxxxxx#sh lldp nei
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID Local Intf Hold-time Capability Port ID
xxxxxxx.Gi1/0/6 120 B,R Twe1/0/4
xxxxxxx.Gi1/0/5 120 B,R Twe2/0/4
xxxxxxx Gi1/0/4 120 B Gi0
xxxxxxx Gi1/0/3 120 T 001a.e82c.5710
