01-15-2011 07:46 AM - edited 03-06-2019 03:00 PM
Hi all,
i have 2650 router with memory as shown below
2650XM#sh ver
Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 18-Aug-10 04:49 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
2650XM uptime is 6 weeks, 10 hours, 54 minutes
System returned to ROM by power-on
System restarted at 21:36:10 MST Fri Dec 3 2010
System image file is "flash:c2600-adventerprisek9-mz.124-25d.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 2650XM (MPC860P) processor (revision 3.0) with 253952K/8192K bytes of memo ry.
Processor board ID JAE08116F4Y
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
1 Serial interface
1 Virtual Private Network (VPN) Module
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
2650XM#sh flash
2650XM#sh flash:
System flash directory:
File Length Name/status
1 29968428 c2600-adventerprisek9-mz.124-25d.bin
[29968492 bytes used, 20363152 available, 50331644 total]*******************************
49152K bytes of processor board System flash (Read/Write)
i need to create core dump or crashfile on router in case of crash.
can someone tell me from config below which options should i use
2650XM(config)#exce
2650XM(config)#exception ?
core-file Set name of core dump file
crashinfo Crashinfo collection
data-corruption Data error exception handling
delay-dump Pause dump (in the case of dump via peer)
dump Set name of host to dump to
flash Set the device and erase permission
memory Memory leak debugging
protocol Set protocol for sending core file
region-size Size of region for exception-time memory pool
spurious-interrupt Crash after a given number of spurious interrupts
1> is core dump uses flash memory of router ?
2>what is difference between crashinfo and dump ?
thanks
mahesh
Solved! Go to Solution.
01-16-2011 06:17 AM
Yes it does
The crashinfo file saves information that helps Cisco technical support representatives to debug problems that caused the Cisco IOS image to fail (crash). The device writes the crash information to the console at the time of the failure, and the file is created the next time you boot the Cisco IOS image after the failure (instead of while the system is failing).
HTH>
01-15-2011 12:01 PM
Mahesh
1> is core dump uses flash memory of router - Yes
2> what is difference between crashinfo and dump - crashinfo (Crashinfo collection) dump (Set name of host to dump to)
HTH>
01-15-2011 02:38 PM
Hi,
thanks for reply
just need to check when we use command
exception crashinfo buffersize 32
then this is saved in router flash?
mahesh
01-16-2011 06:17 AM
Yes it does
The crashinfo file saves information that helps Cisco technical support representatives to debug problems that caused the Cisco IOS image to fail (crash). The device writes the crash information to the console at the time of the failure, and the file is created the next time you boot the Cisco IOS image after the failure (instead of while the system is failing).
HTH>
01-17-2011 07:04 AM
Hi Andrew
Many thanks for reply.
regards
MAhesh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: