config QoS SW2960X

[leo.ramirez]

Good afternoon. as I set up the lines "mls qos srr-queue INPUT ..." in SW 2960X. only leaves the option output

[Reza Sharifi]

Ingress queuing is not supported on the 2960X switches.  So that is why you only see output keyword only.

Restrictions for QoS

The following are the restrictions for QoS:

• To use these features, the switch must be running the LAN Base image: stacking, DSCP, auto-QoS, trusted boundary, policing, marking, mapping tables, and weighted tail drop.
• Ingress queueing is not supported.

link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/qos/configuration_guide/b_qos_152ex_2960-x_cg/b_qos_152ex_2960-x_cg_chapter_010.html

HTH

[leo.ramirez]

OK. but the services provided by these "input" commands are active in the SW ??
as I can leave services running command "mls qos srr-queue input.." ??