Thanks Leo , its working with IP ftp username / password but it is not working with write memory.
I have another switch 2960 and its workign with both copy / wr memory. Configuration of this switch is mentioned also:-
OGGG3-A-1#copy running-config ftp:
Address or name of remote host []? 192.168.60.201
Destination filename [oggg3-a-1-confg]?
Writing oggg3-a-1-confg !!
6591 bytes copied in 1.091 secs (6041 bytes/sec)
OGGG3-A-1# wr mem
Building configuration...
[OK]
archive
path ftp://CACO:CACO01@192.168.60.201/$h-$t
write-memory
time-period 5
no file verify auto
OGGG3-A-1#sh ver
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEAS E SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 18:15 by nachen
Image text-base: 0x00003000, data-base: 0x01100000
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWAR E (fc4)
OG3-A-1 uptime is 6 years, 9 weeks, 15 hours, 5 minutes
System returned to ROM by power-on
System restarted at 16:29:08 MEZ Wed Feb 24 2010
System image file is "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE 5.bin"
cisco WS-C3560-48TS (PowerPC405) processor (revision G0) with 122880K/8184K byte s of memory.
Processor board ID FDO1346Y1BB
Last reset from power-on
1 Virtual Ethernet interface
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
________________________________-
PASW029#sh running-config | begin arc
archive
path ftp://CACO:CACO01@192.168.60.201/$h-$t
write-memory
time-period 10080
!
PASW029#wr memory
Building configuration...
[OK]
Writing PASW029-Apr-27-09-42-27.521-8
PASW029#wr memory
Building configuration...
[OK]
Writing PASW029-Apr-27-09-43-13.734-9
PASW029#sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 03-Mar-14 22:53 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01900000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
PASW029 uptime is 2 weeks, 19 hours, 3 minutes
System returned to ROM by power-on
System restarted at 14:45:00 CEDT Tue Apr 12 2016
System image file is "flash:/c2960-lanbasek9-mz.122-55.SE9/c2960-lanbasek9-mz.122-55.SE9.bin"
cisco WS-C2960G-48TC-L (PowerPC405) processor (revision H0) with 65536K bytes of memory.
Processor board ID FOC1510Y69W
Last reset from power-on
2 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : B8:BE:BF:85:04:80
Motherboard assembly number : 73-10300-12
Power supply part number : 341-0098-02
Motherboard serial number : FOC15100LYP
Power supply serial number : AZS150913DW
Model revision number : H0
Motherboard revision number : A0
Model number : WS-C2960G-48TC-L
System serial number : FOC1510Y69W
Top Assembly Part Number : 800-27071-06
Top Assembly Revision Number : D0
Version ID : V06
CLEI Code Number : COMB800BRA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 48 WS-C2960G-48TC-L 12.2(55)SE9 C2960-LANBASEK9-M
Configuration register is 0xF
