Good afternoon I need a help regarding a switch catalyst 4500 with ios cat4500e-universal.SPA.03.02.00.XO.150-2.XO.bin
I need help in configuration modules 3 and 4 of supervision, the problem is that I need the 4-port module 3 are active but only the first turn on both the module 3 and the first port on the module 4.
please if anyone knows of this issue.
attachment of visualization:
CSFCoreCisco#show module
Chassis Type : WS-C4507R E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 18 10GE (X2), 1000BaseX (SFP) WS-X4606-X2-E JAE161102E8
2 18 10GE (X2), 1000BaseX (SFP) WS-X4606-X2-E JAE161102C5
3 6 Sup 7L-E 10GE (SFP ), 1000BaseX (SFP) WS-X45-SUP7L-E CAT1609L2GR
4 6 Sup 7L-E 10GE (SFP ), 1000BaseX (SFP) WS-X45-SUP7L-E CAT1609L2AH
5 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E JAE1609037W
M MAC addresses Hw Fw Sw Status
-- -------------------------------- --- ------------ ---------------- ---------
1 442b.037a.379a to 442b.037a.37ab 1.2 Ok
2 442b.037a.32d2 to 442b.037a.32e3 1.2 Ok
3 f0f7.553a.9cc0 to f0f7.553a.9cc5 1.1 15.0(1r)SG3 03.02.00.XO Ok
4 f0f7.553a.9cc6 to f0f7.553a.9ccb 1.1 15.0(1r)SG3 03.02.00.XO Ok
5 c464.13e1.ae06 to c464.13e1.ae35 1.0 Ok
Mod Redundancy role Operating mode Redundancy status
---- ------------------- ------------------- ----------------------------------
3 Standby Supervisor SSO Standby hot
4 Active Supervisor SSO Active
