cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
469
Views
0
Helpful
0
Replies

configuring cisco router 2911 with NAT

Hi

I have cisco router 2911 and cisco catalyst 3560G

i want to give my 5 client with corresponding 5Mbps each and 5Mbps for my office any of us must cannot see each other, all of this via either vlan or interface vlan

i want to give my client with static ip not DHCP for security purpose

Client Requirements:

- port forwarding for there internal purpose e.g: range port 3000 - 3050

- no filter, no firewall, no restriction, just open

- etc client must free for everything they want

Here's the available port on my router and switch:

router:

int gig 0/0 - WAN with ip 25.212.50.54 255.255.255.252

int gig 0/2 - LAN for NAT with ip 11.11.11.1 255.255.255.252

and i already configure cause we use it now:

ip route 0.0.0.0 0.0.0.0 25.212.50.54

switch:

int gig 0/14 - client 1

int gig 0/15 - client 2

int gig 0/16 - client 3

int gig 0/17 - client 4

int gig 0/18 - client 5

int gig 0/19 - office

int gig 0/20 - router to switch link

Every comment highly appreciated

Thanks

I know some but i am not an expert

0 Replies 0