12-01-2010 08:21 AM - edited 03-06-2019 02:18 PM
Hello everybody.
Ok. here is the question. Is it possible to make an uplink between a Cisco Catalyst 3550 switch (via 1000BASE-T GBIC model WS-G5483) and a Catalyst 2960 switch (via 1000BASE-T model GLC-T SFP module or it's gigabit Etherner ports)?
Best Regards
Luis Alvarez
Solved! Go to Solution.
12-01-2010 09:10 AM
Hi , just tested it for you , yes it works , WS-C2960-24TT-L & ws-g5483 & WS-C3550-48-EMI connected together with the rj45 10/100/1000 port ,see logs attached :
cheers & good luck
Edgse
12-01-2010 09:10 AM
12-01-2010 10:51 AM
Thank you very much!
Best regards
Luis Alvarez
12-01-2010 10:27 AM
We are connecting the same 2 Devices but with a Fiber Cable SC-LC ( SC from 2960 End ) and ( LC from 3550 End ) and it works with No Problem.
Regards
12-01-2010 10:55 AM
Thank you Very much!
regards
Luis Alvarez
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide