Hi. I was trying to change the mode of operation of the stack switch from Bundle to Install mode but after reloading it it stuck on this result : Anyone could help on this?
Booting...
Interface GE 0 link down***ERROR: PHY link is down
Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 30417560
Bundle Image
--------------------------------------
Kernel Address : 0x537783bc
Kernel Size : 0x3664b3/3564723
Initramfs Address : 0x53ade86f
Initramfs Size : 0x1943229/26489385
Compression Format: mzip
Bootable image at @ ram:0x537783bc
Bootable image segment 0 address range [0x81100000, 0x81bffab0] is in range [0x8 0180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@@boot_system: 623
Loading Linux kernel with entry point 0x816e1140 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
%IOSXEBOOT-5c8e9d6656e9d89a8dedeae457871084-new_cksum: (rp/0): 4
%IOSXEBOOT-5c8e9d6656e9d89a8dedeae457871084-saved_cksum: (rp/0): 4
Waiting for 120 seconds for other switches to boot
#######################################################################################################################
Switch number is 1
