DHCP and NTP in Cisco Catalyst 9600

[Tarek2023]

Hello,

Can I use Cisco Catalyst 9600 as Dynamic Host Configuration Protocol and Network Time Protocol server? if yes, how to configure the Cisco Catalyst 9600 to act as  Dynamic Host Configuration Protocol and Network Time Protocol server?

Thank you in advance.

[Flavio Miranda]

Hello,

DHCP server yes, you can see here:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-11/configuration_guide/ip/b_1611_ip_9300_cg/configuring_dhcp.html#ID47 

NTP server is not possible

[Leo Laohoo]

A humble Raspberry Pi can be built to become a Stratum-1 NTP sever (The Raspberry Pi as a Stratum-1 NTP Server).

I recommend to include a PoE HAT.

[MHM Cisco World]

NTP master <<- if this command accept by SW then SW can work as NTP server for all other network device 

For dhcp is easy only you need 

Ip dhcp pool <name>

defualt router <IP of SVI of vlan >

Dns server 

Network <same subnet of SVI of vlan host connect to>