DHCP failed. APIPA being used. HELPP

[erueru]

I'm very new in this kind of dhcp and it is really hard to know which is the right thing to do. I can't figure out the error why I cant request a DHCP. Thanks for the help here are the ip addresses. https://drive.google.com/file/d/1uqKM3QfVwjicms00Fefaa78mr1P04N38/view?usp=sharing

  

[Georg Pauwen]

Hello,

post the zipped Packet Tracer project (.pkt) file...

[luis_cordova · Accepted solution]

Hi @erueru 

I am attaching the corrected file and you go to indicate the corrections.

1- I corrected the static routes of the main router

2 - If you are going to occupy subinterfaces, the main interface should not have an IP address, only the subinterfaces.

3 - Also, the IP indicated in the ip helper-address command is the IP of the router that has the DHCP services configured.

4 - In the router on the left, I assign it the gateway in the subinterface g0/1.10

5 - In the router on the right, I create and assign it the gateway on the g0 / 1.10 subinterface

Regards