DHCP RELAY

[command0000]

Hi guys

i have a problem on setting up DHCP relay, connecting to DHCP server on Windows 2012 r2. 

i have a tree vlan and i want to get the dhcp on the scope i created on the dhcp server

[Mark Malone]

what way have you configured it , are you using dhcp helper , can you provide some further information ?

[command0000]

hi mark

i am now ok with the DHCP relay. but can you help me on the Link aggregation Group? i encountered error when i am grouping the port. 

Please see the image

ERROR "I encountered Port gi1 belong to a vlan"

[Mark Malone]

I don't use these SMB switches but I checked that alert and someone already had that issue

check this post and follow the answer marked as correct and see if it works

https://supportforums.cisco.com/discussion/11170491/sf300-lag-port-doesnt-work-lacp-will-not-enable

[InayathUlla Sharieff]

Agree with Mark on this.

Kindly provide the following data:-

DHCP server---connecting to which device.

how does your setup looks like?

Do you have cisco router/switches in the network?

Who is the dhcp relay agent towards the dhcp server?

Example:-

DHCP server-------router----Switch----Client.

DHCP server- Pool confiugred.

Router:- Check if this is the DG for users then on that L3 interface do you have ip helper address configured.

Switch:- Check f the client is on the proper vlan.

Regards

Inayath