Difference in commands between IOS and IOS-XE devices?

[msgforsunil]

Hello All,

Is there any command difference between IOS and IOS-XE routers?  If yes, can you please share more details on the same?

Thanks

Sunil Kumar

[Reza Sharifi · Accepted solution]

Hi,

Most commands are the same for both IOS and IOS-XE.

Here is more info:

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-xe-3sg/QA_C67-622903.html

HTH

[msgforsunil]

Thank you very much.

[Peter Paluch]

Hi Reza,

Nice document. Thanks for the URL!

Best regards,
Peter

[Parvesh Paliwal]

seems url is not working and redirects to somewhat else. Any possibilities ?

[Rich_C]

Update: for anybody searching for the same answer as of Oct/2022:

The link is no longer valid on Cisco's site.

I did find the updated link and it alludes to the following info:

Not valid: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-xe-3sg/QA_C67-622903.html

May be a helpful start: Networking Software (IOS & NX-OS) - https://www.cisco.com/c/en/us/products/ios-nx-os-software/index.html?dtid=osscdc000283

More specifically: search for "Cisco IOS and Cisco IOS-XR Command differences" for other web good web results.

Also the following from the updated link:

https://community.cisco.com/legacyfs/online/attachments/document/files/catos-vs-ios.pdf <- still a valid link