06-23-2010 02:32 PM - edited 03-06-2019 11:44 AM
Hello Cisco Support Forums,
------------------ show power ------------------ system power redundancy mode = redundant system power total = 2771.16 Watts (65.98 Amps @ 42V) system power used = 1588.86 Watts (37.83 Amps @ 42V) system power available = 1182.30 Watts (28.15 Amps @ 42V) Power-Capacity PS-Fan Output Oper PS Type Watts A @42V Status Status State ---- ------------------ ------- ------ ------ ------ ----- 1 WS-CAC-3000W 2771.16 65.98 OK OK on 2 WS-CAC-3000W 2771.16 65.98 OK OK on Pwr-Allocated Oper Fan Type Watts A @42V State ---- ------------------ ------- ------ ----- 1 WS-C6K-13SLT-FAN2 298.20 7.10 OK Pwr-Requested Pwr-Allocated Admin Oper Slot Card-Type Watts A @42V Watts A @42V State State ---- ------------------ ------- ------ ------- ------ ----- ----- 1 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 2 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 3 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 4 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 5 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 6 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on 7 WS-SUP720-3B 282.24 6.72 282.24 6.72 on on 8 - - 282.24 6.72 - - 9 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on
06-23-2010 02:53 PM
Oh I solved it.
They're running 220V so the PSUs are capable of 65 Amps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide