DLSw on Catalyst 3750 software

[essa.anas]

Hi,

  I have the following case.

On the HQ there is DLSw service.

on the remote site we would like to build network with VLANs.

Is the Cisco 3750 which software support the DLSw, is it the LAN base, IP Base, IP Service?

I assume that we configure the dlsw commands under the vlan interfaces?

[sdheer]

Hi,

The Cat 3750 switches doesnt support DSLW.

Hope that helps.

Please rate if you find the content useful

[essa.anas]

In the old version of Cisco Catalyst 3550 the command bridge-group is available and can be applied on the vlan sub-command. It is working now.

On the new software releases of the 3750 switches, can we use the command bridge-group under vlan interface?

[sdheer]

Hi,

The bridge group command can be used under vlan in newer IOS versions as well.

Regards,

Swati

Please rate if you find it helpful

[essa.anas]

Thank you Swati,

  Which is the lowest Catalyst ios software that support the command, is it: Lan Base, IP Base, IP Service, that I can purchase?

[Shashank Singh]

Hi,

bridge-group command is supported on newer versions of IOS on 3750 . I tried 122-55.SE and found the commands supported. Please see the attachment for details.

Cheers,

Shashank

Please rate this answer if you found the content useful

[essa.anas]

Thanks Swati,

  So the only supported version for the bridge-group is the IPService IOS on the 3750 switch, is it?

[Shashank Singh]

Hi,

This command is supported only on ipservices and advanced ip services images. ipbase images do not support it.

Cheers,

Shashank

Please rate the answer if you found the content useful