Hi Experts,
I have an issue connecting DMZ network in UCS. Please find my logical connectivity picture and i connected Core and DMZ network but whereas the DMZ Packets were dropping frequently and not properly working.
could you please help to whether the below configuration is correct? and i could see that uplink ports 13&14 from default vlan1 since the ports 13&14 is mapped in default vlan1. I know that default vlan1 will apply to all uplink but is there any way to remove the uplink ports from default vlan1
please share your comments and it will help to study more on this concept.
Fabric: A & B in cluster
Fabric model: 6248
UCS Manager Version: 2.1 (3a)
Server Adapter: UCS VIC 1240
the Config look like this.
#show platform software enm internal info vlandb all
vlan_id 1
-------------
Designated receiver: Eth1/13
Membership:
Eth1/13 Eth1/14 Eth1/16
vlan_id 2
-------------
FCOE VLAN: TRUE
vlan_id 3
-------------
Designated receiver: Eth1/13
Membership:
Eth1/13 Eth1/14
vlan_id 4
-------------
FCOE VLAN: TRUE
vlan_id 10
-------------
Designated receiver: Eth1/13
Membership:
Eth1/13 Eth1/14
vlan_id 40
-------------
Designated receiver: Eth1/13
Membership:
Eth1/13 Eth1/14
vlan_id 230
-------------
Designated receiver: Eth1/13
Membership:
Eth1/13 Eth1/14
Regards,
Veera
