04-12-2016 12:01 AM - edited 03-08-2019 05:19 AM
We have a few SG500 stackable managed switches but we also have a C3850 and a number of C3560s. Of course the IOS environment differs a little on all devices but something I have stumbled across is that the SG500 series doesn't seem to like CDP. I set the C3850 links to dynamic desirable but could not execute a command on the SG500 links for dynamic auto so it learns the VLANs automatically. Is there a way to overcome this?
Thanks
Solved! Go to Solution.
04-12-2016 12:26 AM
Hi sg500s or most smb switches do not support vtp like catalyst so it will not work between catalyst and smb , they do support gvrp for automatic vlan transfer between each other in smb but 38s wont support that in ios-xe so if your bridging these two types of devices you will need to manually manage the vlans
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/Sx500/administration_guide/500_Series_Admin_Guide.pdf
04-12-2016 12:26 AM
Hi sg500s or most smb switches do not support vtp like catalyst so it will not work between catalyst and smb , they do support gvrp for automatic vlan transfer between each other in smb but 38s wont support that in ios-xe so if your bridging these two types of devices you will need to manually manage the vlans
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/Sx500/administration_guide/500_Series_Admin_Guide.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide