Hi everyone,
I'm trying to make my DWDM-XFP-C to work in my CRS-1 at wavelength 55 but the port keeps reporting a wrong wavelength when I do the show controller command:
RP/0/RP0/CPU0:Lab1#show controller dwdm0/2/0/1 optics
Mon Aug 4 17:22:04.659 UTC
Optics Status
Optics Type: 10G-TUNABLE-by-CHANNEL,
Wavelength Info: C-Band, MSA ITU Channel=84, Frequency=191.95THz, Wavelength=1561.826nm
Wavelength Owner: Hardware Default, ITU Channel: GMPLS Signaled=None, Configured=55, Hardware Default=None
TX Power = 1.50 dBm
RX Power = -40.00 dBm
Chromatic Dispersion = -1 ps/nm
Differential Group Delay = -0.01 ps
Second Order Polarization Mode Dispersion = -1 ps^2
Optical Signal to Noise Ratio = -0.01 dB
Polarization dependent Loss = -0.01 dB
Polarization Change Rate = -1 rad/s
Phase Noise = 4294967.295
any suggestion would be appreciated
Thank you
