10-21-2012 03:41 PM - edited 03-07-2019 09:36 AM
When you aggregate multiple fibre GBICs together on the 3508G, do you configure it as an etherchannel, or as fibre-channel? I've looked around online for hours, but can't find it mentioned anywhere.
Thanks in advance,
Brian
Solved! Go to Solution.
10-21-2012 05:58 PM
Etherchannel (or aggregated link, or whatever you prefer).
Fibre-channel is a data link protocol used in storage networks and is a different protocol from ethernet.
Sent from Cisco Technical Support Android App
10-21-2012 06:59 PM
3550G is a data switch, so you use Etherchannel.
10-21-2012 05:58 PM
Etherchannel (or aggregated link, or whatever you prefer).
Fibre-channel is a data link protocol used in storage networks and is a different protocol from ethernet.
Sent from Cisco Technical Support Android App
10-21-2012 06:59 PM
3550G is a data switch, so you use Etherchannel.
10-21-2012 09:01 PM
Thank you very much for the fast responses. Now I know how to proceed when the 3508s come in.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide