Firewall configuration

[obi1thrice23004]

I have a functioning network of Packet tracer and I need some help with my ASA firewall. I need to know what type of firewall, the address scheme inside and outside of the firewall and how to program the ASA firewall to allow DHCP request and replies to pass through the ASA firewall to the network server outside that network and address my PC's inside the network please advise.

[Wyka]

Hello,

If I'm getting this right, for DHCP requests to pass through, ASA should be in transparent mode. And then if I want to use ASA in transparent mode, I will need to allow UDP port 67 and 68 then, right?

Jakub

Jakub Wyka
community.cisco.com/t5/network-security/permitting-dhcp-requests-through-pix-asa pimion.com

[obi1thrice23004]

I tried that. Also used any any statements for all tcp and udp protocols to no avail. Thanks for the help

[paul driver]

---

@obi1thrice23004 wrote:

 I need to know what type of firewall, the address scheme inside and outside of the firewall and how to program the ASA firewall to allow DHCP request and replies to pass through the ASA firewall to the network server outside that network and address my PC's inside the network please advise.

---

is this for a school project?

[obi1thrice23004]

Yes it is