if the local node misses GLBP hellos of one of other node(s) it can change state as reported in the log messages:
000661: Dec 9 22:04:54.662 EST: %GLBP-6-FWDSTATECHANGE: Vlan138 Grp 1 Fwd 1 state Listen -> Active 000662: Dec 9 22:04:56.666 EST: %GLBP-6-STATECHANGE: Vlan138 Grp 1 state Active -> Speak 000663: Dec 9 22:04:56.666 EST: %GLBP-6-FWDSTATECHANGE: Vlan138 Grp 1 Fwd 1 state Active -> Listen
this can be caused by a saturated link or by high cpu on neighbor device.
You should investigate also on the companion devices that take part at the same GLBP group.
Cisco DNA Center nodes lost network connectivity. Cannot SSH to nodes. Cluster and Enterprise port connected to Cisco Nexus Switches.
Cisco DNA Center kernel logs showing hung queue error messages. "sudo cat /var/log/kern.log"
Cisco Digital Network Architecture Center Modules(Design Module)Wireless Part.In this article, we are going to talk about Cisco Digital Network Architecture Center design Module, Wireless Part.Cisco DNA Center gives us the flexibility and scalability to c...
Cisco has announced the availability of the latest IOS-XE release - IOS-XE Amsterdam 17.1. This release IOS-XE 17.1 is a Standard Maintenance Release which has a sustaining lifetime of 12 months with a Restricted build and a PSIRT build. IOS...
Hello everyone, I have written the following guide for myself for my CCNP switch studies. I would like to publish it here for the benefit of others as I was not able to find all the information for it in one place and a lot of different documentation out ...
Cisco’s software-defined wide area network (SD-WAN) solution, powered by Viptela, allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, ...