GLC-T in 3560-E 12 port 10GigE switch

[Jeff.sadowski]

We are looking at possibly placing some GLC-T (Copper SFPs) into the 3560-E 12 port 10GigE switch. We would install the CVR-X2-SFP to get two 1GigE ports from one 10Gig-E switch port. I am wondering if the GLC-T will be supported in the converter and what speeds will be allowed (10/100/1000 or only 1000)? I need to know as soon as possible to resolve an issue......

[Dheebshiba Dinakaran]

Hi,

Yes the GLC-T should support the twin gig module. Could you please specify the SFP model no that you are going to be placing on the 3560?

Please find the necessary links below:

Twin Gig :

<http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7077/product_data_sheet0900aecd805bbee3.html>

Compatibility matrix

<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp137285>

Data Sheet

<http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.pdf>

Thank you!

Cheers!

DB