Having problem pinging from Switch to Router and between different VLANs

[makhan007]

It has been resolved.

[Seb Rupik]

Hi Asif,

Can you provide the following output:

On the router:

sh cdp neigh

sh int trunk

sh ip int br

sh int status | inc conn

Assuming the switch config is identical apart from the VLAN99 SVI's, from SW1:

sh int trunk

sh ip int br

cheers,

Seb.

[cadet alain]

Hi,

you should configure f0/1 on sw1 as a trunk with switchport mode trunk

PC1 on sw3 has incorrect gateway it should be 192.168.4.254

Regards

Alain

Don't forget to rate helpful posts.

[makhan007]

Hello Cadet and all thank you for your reply.

I fixed this problem last night after I posted this question.

I was considering fa0/1 from SW4 to router as not a trunk connection but as soon as I configured it as switcportmode trunk it worked.

But still thank you for your replies and help