07-02-2011 10:04 AM - edited 03-07-2019 01:04 AM
Hi -
I feel stupid writing this and I am not sure I am even in the correct place.
I have really messed up my 871 (non wireless) and I dont know what to do with it to fix it.
I was trying to delete SDM Express from my router so I could put CCP Express on it. So I erased the following files:
home.sthml
sdm-8xxx.config
home.tar
es.tar
common.tar
I then tried to reload IOS. When I reloaded it, it would no longer assign an ip address to my pc...and all I could see when connecting to the console was gibberish.
So then since I couldnt log in or anything, I tried to reset the router by pressing the reset button within 5 seconds of turning the unit on. IT didnt do anything - still gibberish via the console....still wont assign ip address to my laptop.
I also tried setting the ip address myself - 10.10.10.2 but that didnt fix anything - still cant telnet to it.
I am running advanced ip services 12.4 11T2.
Please help!!! Can it be fixed?
Thanks,
Mike
07-02-2011 10:05 AM
Hi -
I forgot to add that the WAN TXD light is now a solid green after booting up. The only other light that is on is the ok light.
Thanks.
07-04-2011 12:52 AM
Hi,
For the console gibberish you should verify your terminal emulator settings:
Bits per sec : 9600 Data bits : 8 Parity : none Stop bits : 1 Flow control : none
Then when you have solved this problem you can do some show commands but it will depend on what message you get in console.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide