01-25-2019 01:37 PM - edited 03-08-2019 05:09 PM
I have an isr 4331 that was purchased with Cisco ONE licensing. it was pulled out of service and configuration wiped. Took it to replace another isr in the field and now the sh license command shows deactivated for everything. out put below:
sh license
Index 1 Feature: appxk9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 2 Feature: uck9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 3 Feature: securityk9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: ipbasek9
Index 5 Feature: FoundationSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 6 Feature: AdvUCSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: cme-srst
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 8 Feature: hseck9
Index 9 Feature: throughput
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 10 Feature: internal_service
How do i activate the license we purchased with the router?
Solved! Go to Solution.
01-25-2019 02:15 PM
Hello,
ISR4331#license install
should let you install any of the licenses displayed in your output. Make sure smart licensing is disabled:
ISR4331#conf t
ISR4331(config)#no license smart enable
02-01-2019 06:07 AM
I rehosted the license and that did it. thanks
01-25-2019 02:15 PM
Hello,
ISR4331#license install
should let you install any of the licenses displayed in your output. Make sure smart licensing is disabled:
ISR4331#conf t
ISR4331(config)#no license smart enable
02-01-2019 06:07 AM
I rehosted the license and that did it. thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide