Hi All,
getting CPU utilization around 62%
CPU utilization for five seconds: 54%/6%; one minute: 61%; five minutes: 61%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
35 82081 9642 8512 0.31% 0.21% 0.18% 0 Compute load avg
48 183084 1353073 135 0.79% 0.48% 0.43% 0 Fifo Error Detec
77 50144 272410 184 0.15% 0.15% 0.13% 0 hpm main process
80 64372 36252 1775 0.15% 0.12% 0.13% 0 hpm counter proc
108 124338 985791 126 0.47% 0.28% 0.26% 0 Hulc LED Process
128 346362 36180 9573 0.95% 0.84% 0.84% 0 PI MATM Aging Pr
162 4998625 8608626 580 10.71% 12.48% 12.39% 0 IP Input
211 1502237 8528126 176 2.39% 3.62% 3.69% 0 RIP Router
233 3112937 283591 10976 5.75% 6.91% 6.95% 0 RIP Send
234 9693283 325526 29777 20.31% 23.46% 23.82% 0 RIP Timers
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Switch
#sh sdm prefer The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 3K
number of IPv4 IGMP groups + multicast routes: 1K
number of IPv4 unicast routes: 11K
number of directly-connected IPv4 hosts: 3K
number of indirect IPv4 routes: 8K
number of IPv4 policy based routing aces: 0.5K
number of IPv4/MAC qos aces: 0.5K
number of IPv4/MAC security aces: 1K
Please let me know what could be the reason?
