02-11-2014 07:00 AM - edited 03-07-2019 06:08 PM
Hi,
I came across a scenario where i can see a huge ping response on a single switch port.
I have connected a laptop to that port and simply pinging the getway, the ping is high and low continously. it is not stable. i change the cable i check on different port on the same switch it is working fine. but on this port why it is responding like this have no idea.
i reset the interface and put it to normal access port like others but result is same.
has anyone faced this issue.
Please advice.
Regards,
Azeem
02-11-2014 07:09 AM
Any indications from show interface or show interface counters errors that there is anything wrong? The port is not in half duplex?
Daniel Dib
CCIE #37149
Please rate helpful posts.
02-11-2014 07:13 AM
No. the port is not in half duplex. it is working on 1Gbps full which i checked on connected laptop. but i found too many output drops on the interface. No CRC, no Runts, Giants.
02-11-2014 08:12 AM
Hi,
have you tried with a different laptop?
I faced a similar problem on 2 new laptop Dell some weeks ago. This seems strange but the problems was from laptop.
Pier
02-11-2014 08:16 AM
Actually i checked on another port from this laptop it is working fine only this port reply is high
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide