Hosts Cannot Ping Router with Multiple VLANs

[eschubauer]

For some reason my hosts and servers cannot ping my router and vice versa. The hosts can ping each other in their VLAN. The servers can ping each other in their VLAN. The switches can ping the hosts. I have configured trunking between the two switches and the router. Switchports have been configured for access to the correct VLANs. Everything else seems to be setup properly as well.

Any suggestions? I will attach my entire file from GNS3 in here. I have also attached a screenshot of the topology in GNS3.

[Dennis Mink]

Can your switches ping the router's L3 interfaces from VLAN 500?

cheers

[paul driver · Accepted solution]

Hello

The switches should be host switches ,So make sure you have disabled ip routing on them?

res
Paul

[eschubauer]

I disabled "ip routing" on the switches and that did the trick. Thank you for the help!

[paul driver]

Hello

Glad to hear that, Can you please rate and close so to assist in feed back for others

res
Paul

[eschubauer]

This is one of my first discussions. Did I rate and close properly?