hi ,
i have the topology below ,
http://im20.gulfup.com/2012-07-17/1342517023191.jpg
i have two routers , one used as a gateway and connected to two internet sources ,
i have vlan 10 with which has the subnet x.y.66.128/25 and want to apply OQS to this vlan as following:
i want to dedicate cir with 15 mega , .
my subnet will go to internet out from the interface Gi0/3.3 which is a subinterface of the gateway router.
==============================
before all of that :
the 1st trial , imade a sub interface on the Bras router Gi0/2.2 and let it the gatway of my subnet and applied the QOS out of the Bras router to the interface Gi0/1.
but i read that it is risky to do it in that place, and the optimal place is to apply this QOS on the gateway router as output .
my problem is , i could do the policymap to bras , but if i want to apply it to the gateway i have to apply it to subinterface Gi0/3.3 and it is not being accepted to be applied n the subinterface .
here is the error when i try to apply it :
Gateway(config-subif)#service-policy output sawa
CBWFQ : Not supported on subinterfaces
=========================
now i want to help me how to apply my qos to the subinterface,
i will include the my previous config wheni was applying it to bras router and want to help me wt to modify so as to be able to be applied to the gateway subinterface Gi0/3.3
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
here is the accesslist matched my subnet
Extended IP access list sawa
10 permit ip x.y.66.128 0.0.0.127 any (387727 matches)
Class Map match-all sawa (id 10)
Match access-group name sawa
Policy Map sawa
Class sawa
bandwidth 15000 (kbps)
Class class-default
fair-queue
Bras#
service-policy output sawa =======> under the interface Gi0/1 of Bras router
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
my request now is , what i need to modify so as my config work well on the subinterface Gi0/3.3 on the agteway router ??????
regards
