I am using Cisco Nexus 7K as NTP server but not sure which protocol version is being used. Is there any way we can find the NTP protocol version in Nexus 7K? As we can see in other routers with below command we can get the information, but this command is not available in NX-OS.
R3#show ntp associations detail
127.127.7.1 configured, our_master, sane, valid, stratum 7
ref ID 127.127.7.1, time C0294DEF.88274050 (00:46:39.531 UTC Fri Mar 1 2002)
our mode active, peer mode passive, our poll intvl 64, peer poll intvl 64
root delay 0.00 msec, root disp 0.00, reach 37, sync dist 875.015
delay 0.00 msec, offset 0.0000 msec, dispersion 875.02
precision 2**18, version 3
org time C0294DEF.88274050 (00:46:39.531 UTC Fri Mar 1 2002)
rcv time C0294DEF.88274050 (00:46:39.531 UTC Fri Mar 1 2002)
xmt time C0294DEF.8827245A (00:46:39.531 UTC Fri Mar 1 2002)
filtdelay = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filtoffset = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filterror = 0.02 0.03 0.05 0.06 0.08 16000.0 16000.0 16000.0
Reference clock status: Running normally
Timecode:
Thanks,
Vishal Babrekar
