cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1629
Views
0
Helpful
4
Replies

How to upgrade C3550-24-EMI

arifdatau
Level 1
Level 1

I need your help in the process of upgrading IOS image in this particular switch to c3550-ipservicesk9-mz.122-44.SE6.bin. Thank you for your help.

SW1#sh version

Cisco Internetwork Operating System Software

IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(11)EA1, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Wed 28-Aug-02 10:03 by antonino

Image text-base: 0x00003000, data-base: 0x0071D658

ROM: Bootstrap program is C3550 boot loader

ALS1 uptime is 1 day, 14 hours, 0 minutes

System returned to ROM by power-on

System image file is "flash:c3550-i5q3l2-mz.121-11.EA1/c3550-i5q3l2-mz.121-11.EA1.bin"

cisco WS-C3550-24 (PowerPC) processor (revision G0) with 65526K/8192K bytes of memory.

Processor board ID CHK0641V18Z

Last reset from warm-reset

Bridging software.

Running Layer2/3 Switching Image

Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface

Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

The password-recovery mechanism is enabled.

384K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:0B:46:3A:4C:00

Motherboard assembly number: 73-5700-09

Power supply part number: 34-0966-02

Motherboard serial number: CAT063904BM

Power supply serial number: DCA063810V1

Model revision number: G0

Motherboard revision number: A0

Model number: WS-C3550-24-EMI

System serial number: CHK0641V18Z

Configuration register is 0x10F

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

You can upgrade to 12.2 version IOS as long as you have a valid Cisco Service Contract.

Go here to find the IOS.

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

You can upgrade to 12.2 version IOS as long as you have a valid Cisco Service Contract.

Go here to find the IOS.

Leo Laohoo
Hall of Fame
Hall of Fame

Thanks for the ratings and quick feedbacks.

Download the "TAR" file and use the proceedure below:

Step-by-Step Procedure for the 3550 with Use of the CMS Image (.tar File)

You are very welcome!

I had bad experiences in the passed when upgraded image that located on top of that image dir before. That is why I need to make sure I run the proper step. Let me go through with the link you gave me and I hope you mind I'am asking if I might stumble into some problem.

No, we don't mind if you ask more question.

Before I forget ... Before pushing the IOS to the switch, make sure you check (and compare) the hash to ensure the IOS file you downloaded is either complete and/or not corrupted. 

Review Cisco Networking for a $25 gift card