11-08-2013 01:14 PM - edited 03-07-2019 04:29 PM
I need download an image file by using tfpf.
before running command archive download-sw /overwriteftp:/192.168.121.228/C:\C:\tftpboot/c1200-k9w7-mx.123
shown:
examining image...
%Error opening (Invalid IP address or hostname)archive download: takes 0 second
s
I appreciate your help.
Thank
Solved! Go to Solution.
11-11-2013 02:00 PM
%Tar checksum error in fd 0
This means the file you've downloaded is corrupt or it's not completed.
Go to the Cisco website and download the IOS again. Once download is complete, compare the MD5 hash value of the file against the value found in the Cisco website. Make sure both values match.
11-08-2013 04:25 PM
Firstly, you know you've posted this thread in the JAPANESE section.
Finally, this command "archive download-sw /overwriteftp:/192.168.121.228/C:\C:\tftpboot/c1200-k9w7-mx.123" is so wrong is so many places.
1. Make sure your TFTP client is pointing to the same directory where the filename is located.
2. Your syntax is wrong. The command should be "archive download-sw /overwrite tftp://
Do you see the bit where you have "/C: \C:\tftpboot"? This will throw up another set of error messages.
11-11-2013 09:08 AM
Hi,
the problem was corrected in the syntax but i can't download the image by using tftp.
after running the command shows me the following:
AP_INFRAESTRUCTURA#$write tftp://192.168.121.228/c1200-k9w7-mx.123-8.JEE
examining image...
Loading c1200-k9w7-mx.123-8.JEE from 192.168.121.228 (via BVI1): !
%Tar checksum error in fd 0
ERROR: Failed to extract from archive file tftp://192.168.121.228/c1200-k9w7-mx.
123-8.JEE
archive download: takes 1 seconds
have a suggestion?
11-11-2013 02:00 PM
%Tar checksum error in fd 0
This means the file you've downloaded is corrupt or it's not completed.
Go to the Cisco website and download the IOS again. Once download is complete, compare the MD5 hash value of the file against the value found in the Cisco website. Make sure both values match.
11-12-2013 05:07 AM
thank for your comments.
helped me a lot.
I'll do you suggest
11-12-2013 01:14 PM
Let us know how it works out.
Thanks for taking the time to rate our posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide