Current equipment
Cisco 2901 router
Cisco 2504 WLC w/2602i AP's
Cisco SG300 switches
Printer is on default vlan 1 - 192.168.0.10 address
Public wifi is on vlan 50 - 192.168.50 x
Public wifi / Vlan 50 is currently access restricted at the router to only allow traffic in/out to external wan/internet 170.164.72.x
Is it possible to allow clients on vlan50 to have restricted access to the 192.168.0.10 network printer to do printing?
Would I do that at the router? wlc? switch port for the printer?
thanks for any help on this?
Steve