I tried to copy running config into startup config with "WRITE" and "COPY RUN START" commands on "CISCO 2960X Switch" but facing Issue.

[muhammadusama.shaukat]

I tried to copy running config into startup config with "WRITE" and "COPY RUN START" commands on "CISCO 2960X Switch" but facing following issue displayed in image. I dont have enough knowledge to play with Flash Memory. I will appreciate your help.

[Leo Laohoo]

Post the complete output to the following commands: 

sh boot

[muhammadusama.shaukat]

[muhammadusama.shaukat]